The Victron Blue Smart Charger IP65 24V 8A with built-in Bluetooth for workshops, cars, campers, motorcycles and boats provides the battery with the necessary energy, maintains its health and ensures better performance and longer life. This can be used on both AGM and lithium batteries.
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. This 24V 8A Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans and can be used on both AGM and lithium batteries.
Victron IP65 24V 8A Charger Features:
Water, dust and chemical resistant
Seven steps smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
The VictronConnect App Setup
Readout and configure your Blue Smart IP65 Charger via your smartphone!
You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen, the readout of voltage and current is the default.
Download the app for iOS and Android here at https://www.victronenergy.com/live/victronconnect:start
Ultra high efficiency “green” battery charger
With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0.5 Watt, some five to ten times better than the industry standard. Durable, safe and silent – Low thermal stress on the electronic components. – Protection against ingress of dust, water and chemicals. – Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail. – The chargers are totally silent: no cooling fan or any other moving parts.
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with a low current up to a higher voltage.
Recovery function for fully discharged batteries
Most reverse polarity-protected chargers will not recognize, and therefore not recharge a battery that has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Less corrosion of the positive plates Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger for more than 48 hours.
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charging process. The temperature is measured again when the charger is in the low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion battery mode
The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under-voltage protection reset.
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, you may return it to us for a refund only. Please see below for more information on our return policy.
Currently Northwest SCADA is not offering any return policy. All sales are final once they have departed our warehouses. Orders may be canceled before they ship at no cost. All returns will be a per order based approval. Contact your sales rep for details or to request a return.
If a return is approve the below standards MUST be met.
- The product must be new, unused, and in the original packaging.
- A restocking fee of 35% will apply.
- The customer is responsible for all shipping costs related to the return of the item(s).
- If it is deemed that a returned product is opened or used, the product will not be returned and the customer will be responsible for covering all costs related to shipping the product back. The customer will also be charged an inspection fee of $120.
- Any products which arrives damaged will be refused. No exceptions.
- If an order is placed but not yet shipped, there will be no restocking fee and a full refund will be provided upon order cancellation.
Exemptions apply on some orders. See below for more details on orders that are exempt from our return policy.
Solar Panel Return Policy
All solar panel sales are final. No returns, no refunds. No Exceptions. If you have any questions about a product before purchase, please contact us.
All Orders over $10000 are final. Northwest SCADA and its partners reserve the right to refuse a return and/or exchange on any order regardless of order amount. A 35% restocking fee applies to all returns.
To return an item, please email customer service at firstname.lastname@example.org to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging and include your proof of purchase, then mail your return to the following address:
PO Box 721
Lytton, British Columbia VOK1ZO
Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return.
After receiving your return and inspecting the condition of your item, we will process your return and issue a refund. Please allow at least thirty (30) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed and completed on our end.
Northwest SCADA is charged a fee of 2.7% + $0.30 on each order. Northwest SCADA reserves the right to withhold this credit card processing fee from any refund they choose.
The following items cannot be returned:
- Solar Panels – All Solar Panel sales are final
- Generators – All Generator sales are final
- Solar Module Racking – All solar module mounting hardware and racking sales are final
- Open Box items
- Special ordered items as per customer request from manufacture are final.
- Orders over $10000. Northwest SCADA and its partners reserve the right to refuse a return and/or exchange on any order regardless of order amount. A 35% restocking fee applies to all returns.
- Oversized item sales are final.
For defective or damaged products, please contact us at the contact details below to arrange a refund or exchange.
- A 35% restocking fee will be charged for all returns.
- The Credit Card Processing Fee is not refundable and will be withheld during refund for order cancellations and returns.
- All Solar Panel sales are final.
If you have any questions concerning our return policy, please contact us at:
All products are backed by the manufactures warranty first. You will find details regarding manufacture warranties below.
|Products & Accessories:
|KestrelMet Weather Stations
|Two (2) years
|Rainwise Weather Stations
|Two (2) years
|Victron Energy Products
|Canbat – Lithium Batteries
|Ten (10) Years
|Pylontech – Lithium Batteries
|Ten (10) Years
Any items not covered by the manufacture warranty above is covered by Northwest SCADA’s Limited 1 Year Warranty.
We want our customers to be confident in the products they purchase from us, which is why we offer a 1 year warranty on all of our products that are not covered by manufacture specified warranties below. In the event that something goes wrong, the buyer will only need to pay for return shipping.
Products that are damaged outside of the manufactures listed warranty specifications will not be covered under the warranty.
Solar Panel Warranty
All solar panels are backed by the solar panel manufactures warranty.
If you have any questions concerning our warranty policy, please contact us at: