The Orion-Tr Smart 24V 15A DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. This Orion-Tr Smart charger can be used in 24V systems and is suitable for both lead-acid and lithium batteries. Unlimited multiple units can be connected in parallel to increase output power.
Orion-Tr Smart 12/24-15A (360W) Isolated 24V 15A DC-DC charger
Low-quality alternators with poor voltage regulation can cause the BMS to disconnect on LiFePO4 batteries. If the BMS disconnects, the
batteries and the alternator may be damaged. To protect your LiFePO4 battery and alternator, You can use this Victron Energy 15A DC to DC charger to safely and effectively charge your batteries using your alternator.
This 24V 15A DC to DC charger works on all Canbat 24V Lithium Iron Phosphate batteries (LiFePO4) with a capacity of at least 30Ah. It works on both Canbat’s regular and low-temperature (LT) lithium series. This includes the 30Ah, 40Ah, 50Ah, 60Ah, 75Ah, 100Ah, 100Ah LT, 150Ah, 150Ah LT, 200Ah, 200Ah LT, 300Ah and the 300Ah LT.
Bluetooth Smart enabled
Any Bluetooth-enabled smartphone, tablet, or another device can be used to monitor, change settings, and update the charger when new software features become available.
– Battery charge algorithm (configurable) or fixed output.
– Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries, absorption time is fixed by default to 2 hours.
Alternatively, a fixed output voltage can be chosen.
Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines)
The built-in engine shutdown detection will stop the converter when the engine is not running.
This prevents unwanted discharge of the starter battery.
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
When installed with the screw terminals oriented downwards.
No special tools are needed for installation.
Input fuse (not replaceable)
To learn More about Victron Energy’s 24V 15A DC-DC Charger, click here.
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, you may return it to us for a refund only. Please see below for more information on our return policy.
Currently Northwest SCADA is not offering any return policy. All sales are final once they have departed our warehouses. Orders may be canceled before they ship at no cost. All returns will be a per order based approval. Contact your sales rep for details or to request a return.
If a return is approve the below standards MUST be met.
- The product must be new, unused, and in the original packaging.
- A restocking fee of 35% will apply.
- The customer is responsible for all shipping costs related to the return of the item(s).
- If it is deemed that a returned product is opened or used, the product will not be returned and the customer will be responsible for covering all costs related to shipping the product back. The customer will also be charged an inspection fee of $120.
- Any products which arrives damaged will be refused. No exceptions.
- If an order is placed but not yet shipped, there will be no restocking fee and a full refund will be provided upon order cancellation.
Exemptions apply on some orders. See below for more details on orders that are exempt from our return policy.
Solar Panel Return Policy
All solar panel sales are final. No returns, no refunds. No Exceptions. If you have any questions about a product before purchase, please contact us.
All Orders over $10000 are final. Northwest SCADA and its partners reserve the right to refuse a return and/or exchange on any order regardless of order amount. A 35% restocking fee applies to all returns.
To return an item, please email customer service at firstname.lastname@example.org to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging and include your proof of purchase, then mail your return to the following address:
PO Box 721
Lytton, British Columbia VOK1ZO
Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return.
After receiving your return and inspecting the condition of your item, we will process your return and issue a refund. Please allow at least thirty (30) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed and completed on our end.
Northwest SCADA is charged a fee of 2.7% + $0.30 on each order. Northwest SCADA reserves the right to withhold this credit card processing fee from any refund they choose.
The following items cannot be returned:
- Solar Panels – All Solar Panel sales are final
- Generators – All Generator sales are final
- Solar Module Racking – All solar module mounting hardware and racking sales are final
- Open Box items
- Special ordered items as per customer request from manufacture are final.
- Orders over $10000. Northwest SCADA and its partners reserve the right to refuse a return and/or exchange on any order regardless of order amount. A 35% restocking fee applies to all returns.
- Oversized item sales are final.
For defective or damaged products, please contact us at the contact details below to arrange a refund or exchange.
- A 35% restocking fee will be charged for all returns.
- The Credit Card Processing Fee is not refundable and will be withheld during refund for order cancellations and returns.
- All Solar Panel sales are final.
If you have any questions concerning our return policy, please contact us at:
All products are backed by the manufactures warranty first. You will find details regarding manufacture warranties below.
|Products & Accessories:
|KestrelMet Weather Stations
|Two (2) years
|Rainwise Weather Stations
|Two (2) years
|Victron Energy Products
|Canbat – Lithium Batteries
|Ten (10) Years
|Pylontech – Lithium Batteries
|Ten (10) Years
Any items not covered by the manufacture warranty above is covered by Northwest SCADA’s Limited 1 Year Warranty.
We want our customers to be confident in the products they purchase from us, which is why we offer a 1 year warranty on all of our products that are not covered by manufacture specified warranties below. In the event that something goes wrong, the buyer will only need to pay for return shipping.
Products that are damaged outside of the manufactures listed warranty specifications will not be covered under the warranty.
Solar Panel Warranty
All solar panels are backed by the solar panel manufactures warranty.
If you have any questions concerning our warranty policy, please contact us at: